Hello Community, Hopefully many of you may have set up band steering function on the EAPs managed by SDN controller to help better utilization of 5GHz SSID. There are couple of parameters that I need...

@AndreMartins I believe you meant to say that Channel number 165 does not allow you to use 40 or 80MHz wide frequency band. This channel only support 20MHz as per North American specifications. If...

" port profile has PVID 1 with 1,2,3,5 untagged " Did you meant to say that you have PVID ( untagged / native VLAN) 1 with 2,3,4,5 tagged? The management IP address of the AP needs to be untagged (it...

I believe it is quite possible that the same company in India developed the GUI for both products. TP-Link logic will be that if the code behind is different, then look and feel can be copied just...

Hello all, Can someone confirm that the port isolation feature also works on the trunk ports set up to connect to downstream switches? I remember this feature in traditional Cisco edge switches where...

I know this is bit old post, but my experience connecting Mikrotik CCR1016 SFP ports to TP link switches or Cisco switches is that both ends needs to be set up to 1000 full-duplex (manual option...