@APmodeUser What you can do is to check again ping results when connected by cable to C6 - ping your main router 192.168.2.254 and see if any packet loss (that's the last ping test you did). If there...

@redovidiu There shouldn't any particular reason for that except if you have turned ON Smart Connect wireless feature. If you have then turn it OFF. What I have experienced with sonoffs when...

@Lyndoon You can hard reset (method 1) the router and login via ethernet cable on 192.168.0.1 (or try on 192.168.1.1 if the former is inaccessible) - how to find your router IP address. On the bottom...

@Sokpan Turn the VDSL router wi-fi off and copy these wireless settings from the VDSL modem/router to the AX11000 like so: If the VDSL device is dual band you have to do the same for 5 GHz band as...

@Samus According to your current C50 FW version : you can set C50 in Range Extender mode: or if it's with an older FW version use the WDS option: Thus you'll connect to the main router wi-fi and...

@pingpingping The reaon for that is most probably - router is probing to see if it has an internet access to visualize it on its status page. You can't change that cause it's embedded in the FW. You...