@peterawilson The problem might be that you have 940n DHCP server disabled as per my instructions. They are valid for configuring WDS feature, but with 940n might be different (it has a dedicated...

@AsifRayhan In C20 GUI you need to switch the operation mode to range extender: The device will reboot. After finishing the rebooting process login via wired or wireless in C20 (192.168.0.1) and set:...

@peterawilson What is your main router and how far are they placed from each other ? Make sure when configuring Range Extender mode the 940N is no more than 5 meters from the main router. After...

@peterawilson WR940N has a dedicated range extender mode - I missed that from the very beginning (ignore the guides in my first post): So resetting the device and following the Quick Setup should be...

@user91 I dug up an old thread which seems like a similar issue with the time settings, but that was with FW 1.4.7

@TEZ_187 So now everything OK ? I was more interested in how this : would look like in the port forwarding table.