@Rubbah First make sure that you get your public IP address on the BE900 Internet port (for example): If you have UPnP feature enabled in BE900, disable it, reboot the router and test again:

@JoazinoBR Apparently this model has been distributed by the ISPs in some countries - here. In your case, you could file a feature request for the feature you mentioned - here.

@mehulparmar31 Follow the instruction in this post regarding your issue. Check the router FW region on it's bottom sticker - if it's an EU find its latest FW release here.

@gspinoza Use a web browser to access your RE WebGUI: 1. Visit http://www.tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. Then you should be able to see...

@Prakarhta The feayre you're refering has to be implemented in the router FW to be available for use. This router is meant to be distributed by ISPs and there's a slight chance implementing such a...

@HughCF Check your WAN port speed - it should be 1000mbps: Disable any QoS services if enabled on the router - restart the router and test again.