@Gossy You can turn your TD-W9970 into an access point by connecting to your main router with an ethernet cable using this guide. That's your only option to extend the wireless coverage of your main...

@Dawarbaba Login the RE450 WebGUI and make sure that 5GHz band is enabled: If it is enabled, check your main router 5GHz band current wireless channel and make sure you're using channels in this...

@Sidhant The easiest way to check if MAC address is the issue is to compare your OLD router WAN MAC address clone settings and set the same MAC address to the new router. If that desn't work, you...

@mkfzdmr To isolate a BE550 issue, you can test building the PPPoE session with a laptop and check if you can access the internet - use this guide. In this scenario you have to connect your laptop...

@vivekranu1 You can go through this article regarding placing you routers for optimal reception and performance. Regarding WDS disconnections - it could be a result due to the above topic. You can...

@mak50 If you've checked the Only Allow the Following IP and entered your WAN IP adddress: You should reset the modem and reconfigure from scratch, If you've made any configuration backup prior to...