@Morkhod To be able to select wireless channels you have to disable Smart Connect feature.

@Rahul7887 Yes, that's correct but this model is not supported by the community and that's the reason you can't find any firmware releases on the support portal. If you want to try a different...

@Rahul7887 This router model is with a customized firmware targeting ISPs. If it is in router mode and you can't find WDS feature in Advanced > System Tools > System Parameters or Advanced > Wireless...

@Nereus Go through this thread - it has been reported that the signal strength can cause this issue. If that's not the case try changing the 6GHz wireless channel and test again: Note: To be able to...

@amarradi To rule out an ISP DNS issue (given that you have access to the DSL modem router WebGUI) you can try the following:

@JollyGuerra That's a known behavior - check this thread. If you set the AX55 Pro in router mode it will do a NAT and its LAN IP address won't be in your 192.168.1.0/24 subnet. I can see that in FW...