@Arushi1203 For resetting the RE you have to press the reset button for about 10 seconds while it's powered on. Blinkin power led means: "The system is starting up or firmware is being upgraded." Try...

@XiTo If your modem is not provided by an ISP then most probably its FW is standard. As for the HW v1.20 and HW v1 it is stated that: (Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8); Vx.x0=Vx.x6/Vx.x8...

@Despero This is probably caused by one of your client devices - it could be IoT device or similar. Can you describe what devices do you have in your local network ?

@RehoDesign AX12 is an entry level AX series router which doesn't have Home Shield feature implemented. Despite that, you can still configure its Parental Conreols to monitor internet usage of a...

@Franco3602 Easymesh is not compatible with Deco mesh - details. As you alreay mentioned - you have to turn off AX10 wireless radio and use only the Deco E4 mesh for wireless access. Here's how to...

@Al22_9 OK. Let's test the following: Remove all these optional settings from TD-W9960 and save the settings: Set TL-WA854RE with a static IP address of 192.168.17.254. Make sure its DHCP server is...