@SharkAttackRJ If you have an ISP modem router before AX90, you probably are behind a double NAT. If you want to avoid that you may refer to this guide (in case ISP modem router allows bridge mode)....

@SharkAttackRJ Both routers are compatible, so don't worry about that. Just follow the guide I posted and you'll have a mesh network between them.

@SharkAttackRJ If you set AX53 in access point mode it won't be in a mesh with AX90. You have to add AX53 as a satellite device to build a mesh between these - here's a guide for that (use the WPS...

@SharkAttackRJ AX90 supports Onemsh, while AX53 supports zeasymesh. If you plan them to be in a mesh you should use the AX90 as a main router and AX53 as a satellite device.

@bharatThapa Parental Controls got nothing to do with the device IP address. The "unique" identifier of a device is its MAC address. If you look through the community threads you'll see plenty of...

@TPC60 You've found the correct guide for configuring Archer C60 as a wireless range extender (WDS feature on 2.4GHz or 5GHz band). Just follow the guide and keep in mind that all steps there have to...