@Cassiopeia23 I have to admit that the Easymesh is still in development and there's a lot of work to be done so it could be as agile as a user would want it to be. I am seeing lately some whole home...

@akb_here What I've meant is that you can easily check the C80 DHCP server pool here: If its LAN IP address is 192.168.0.50, its DHCP pool would serve IP addresses in 192.168.0.0/24 subnet. The IP...

@Jaymie123 I thought that you're trying to avoid double NAT from another main router. If you connect the HX510 directly to the ONT is should be in router mode. The other HX510 should be configured as...

@Jaymie123 If HX510 FW supports building Easymesh in AP mode, this should be a straightforward operation. Configure the master HX510 in AP mode and connect it to your main modem/router - at this...

@jafrmartins WDS can be implemented only through a FW upgrade. The easiest way to have this feature is to replace the deice for one of these I posted earlier.

@jafrmartins It seems that WDS feature has been deprecated since HW v4 for Archer C6. Currently WDS feature is supported on models like C64, C80, C86 - details.