@Piie Ethernet backhaul for AX53 is supported on HW v2 according to this thread. If your AX53 is HW v2 then it should support ethernet backhaul via its official FW.

@RogueMan If that's the case you may have to open some additional ports on your C5 v2 - refer this thread for details.

@RogueMan Nevertheless you should do the check I mentioned to be sure that your ISP has done the job you've requested. If your C5 v2 WAN IP address is in these IP ranges the port-forwarding won't...

@Piie AFAIK the satellite routers have to be directly connected to your main router for having ethernet backhaul working properly. Use this guide for configuring the ethernet backhaul. If for some...

@RogueMan Look at the router WAN port IP address here: This address should be your public IP address for port-forwarding to work. You can check that by typing in Google "What's my IP address" and...

@Crike_Jr I wouldn't know that, but you have to consider that WDS is not a standard across different vendors: WDS may be incompatible between different products (even occasionally from the same...