@daBee3 Have you tried without setting a VLAN ID ? If it doesn't build the DSL connection either way then probably something else goes wrong.

@Ciderlover OK. Let's try the following: 1. How to set PN Hub 2 in modem mode -...

@Apl1970 Archer C2300 v2 supports access point mode. Here's how to configure - Case 1. You have to connect C2300 the same way as if it's in router mode by its WAN port to the superhub LAN port. In...

@Zatara When RE200 is configured in AP mode you have to disable its DHCP server. In this mode your devices will receive their IP addresses from your main router. Here's a guide on how to setup RE200...

@daBee3 That's exactly what I'm doing - bridged TD-W9960 in front of an Archer C80 authenticating through PPPoE session - the last image is from Archer C80.

@SnaffyNoo Just follow the guide and when you configure the Onemsh you'll see what the mesh is and what it can do.