@Cambazz Archer MR400 v4 and above support only OpenVPN and PPTP VPN Server: Here's a guide for configuring OpenVPN Server. Here's a guide for configuring PPTP Server. It doesn't support a VPN Client...

@Zebop917 Probably this post will shed some light on that matter. Follow the FAQ posted and check if that suits your needs.

@Pidi If you haven't created a password the default username/password is admin/admin. If you've created a password use that password. If neccessary reset the router to its factory defaults (using...

@Zebop917 Make sure that your IP address reservations are below 192.168.1.99 (within VR400 DHCP server pool). Use the IP addresses above 192.168.1.100 for fixed IP addresses that are set on your...

@LULUN If you can't see the wireless password/PIN clearly on the bottom sticker use an ethernet cable to connect to one of TD-W8961N LAN ports. Open http://tplinkmodem.net or 192.168.1.1 in a browser...

@John_04 Try reducing the RE wireless coverage like this: and test again. If the problem persists lower the coverage to minimum and test again.