@Dragos1 Considering your network topology and equipment you can't have both AX10 providing an isolated guest network and all client devices in the same local subnet. With your first attempt you can...

@tikmok You can't use AX3000 in AP mode to build a OneMesh - check this FAQ - Q8/A8.

@Kevin_Z On the EasyMesh compatibility list page Archer AX53 is marked as "Planned" but it already has an official EasyMesh compatible firmware. When filtering wireless routers with an advanced...

@Akp1436 Try connecting to a different port of your ISP device or using another cable (CAT 5e/6) for connecting the C6 to the ISP device. Usually the cable included in the C6 kit is the best choice.

@kontroversi Make sure that you're with the latest FW release for your device - observe the bottom sticker to determine the its region and HW version and upgrade if there's a newer FW release. Check...

@marl1 The EasyMesh feature is not compatible with the Deco mesh - see details here. Moreover both router models should support an ethernet backhaul. You have two options: 1.Place your AX53 near the...