@BarryThompson This feature is implemented on a particular router models described in this thread.

@Moe29 From your description, you're not missing anything - here's the guide to configure WDS on C60. Try rebooting the C60 after configuring the WDS and check if there's any difference. Keep in mind...

@Rob__ When used in client mode TL-WR902AC should have a LAN IP address in the same subnet as your main router already has - that's by design. If you need to put your Pi cluster in a different subnet...

@ugandave Configuring AX53 in AP mode is very simple. Use this guode - Case 1. Use kit's AX53 ethernet cable for initial configuration and tests. If everything works as expected inside the building,...

@VISHALRAJ Use this guide to update your router FW. Make sure that FW region and HW version match.

@Sivaprakash Here's the official procedure for recovering the router when bricked - method. 1 You may also take a look at this thread which explains in detail method 1.