@thyristor44 Use this guide (Case 2) to configure your router as an access point: If you want to use it as a WDS bridge (range extender) use this guide:

@M.Bouzaid . Given that you have a router (VR300) and an access point (?), you should have only one DHCP server enabled (on VR300) in your network to avoid IP address assigning mismatch. If your...

@Mari0 If you're referring to "WDS bridge' then here's the guide for WR850N: However this router model has been provided by ISPs - it could be with a customized FW and this feature may not be...

@ET13 You should not use a FW from one region to update a device from another one - it would not work or in some cases can damage your device. It is suggested to keep an eye on your local support...

@agyjbc If you want to use a new DDNS account, click Logout first, and then log in with a new account. If you want not only to logout your current DDNS account, but completely remove it from the GUI,...

@rossack Make sure that you have ping to your VR400 LAN IP address first. If you don't, then you may have to add a static route for VR400 subnet: You may also have to add an Access Control rule for...