@sb1122 You don't need to move LAN group on VR600 - just follow the guide I posted. Connection should be your Netgear router LAN port <=> VR600 LAN port (LAN1 for example). Even switched into "DSL...

@sb1122 It seems that you need your VR600 in AP mode - having two different LAN subnet can cause this type of behavior when VR600 is switched into "wireless router mode". For this purpose switch back...

@ThreeM C80 is full gigabit router - if your cables are OK then every ethernet cable connection (with Cat5E/6) between two C80 should be negotiated at 1000mbps. Usually the reason for this kind of...

@Areks To avoid any other conditions that are limiting your bandwidth - disable QoS on your AX90. Here's your bottleneck according to the screenshots you posted: If your Dell Precision 3561 wireless...

@Sebastianogo Yes, C64 is a pretty decent device with a good price/performance ratio. Usually the issue with C6 v2 is due to a network cable quality (minimum Cat5E/6 is required) or bad RJ-45...

@Sebastianogo Yes, RE315 is not an EasyMesh compatible RE. The mesh network with an ethernet backhaul you expect, should comprise only devices that support it. These are C80 and C64 in your case. Any...