@Amogh_R Yes, they all do - that's their ethernet port could be used for. See here how you can compare different Deco models. Here's a guide on how to configure the Deco ethernet backhaul.

@Amogh_R Read through this thread - it includes a video guide for setting up and the device list that currently supports EasyMesh. However, keep in mind that EasyMesh supports ethernet backhaul...

@Inta Unfortunately not, this model is not officially supported and the only source of a new FW release could be the ISP you've obtained the router from. Here's an example from TPG community -...

@Inta Yes, there's a guide on how to configure WDS feature for xDSL routers here. You can use also the VR1600v user guide - here - Appendix: Troubleshooting - T6 How to use the WDS Bridging function...

@Gopal2022 I have used a similar setup on a few occasions and it works as expected: C64 (router mode) LAN port => WAN port A6 (AP mode) LAN port => WAN port C6 (AP mode) - daisy-chained should work...

@azgar Check your Archer C64 bottom sticker and confirm whether it's a Archer C64(EU) or Archer C64(US) region device. The FW regions are not interchangable. You have to use a FW release for the same...