@GeorKhawam Could it be the case that you've configured the QoS feature on C58HP ? If not, I would suggest to reset the C58HP to factory defaults and re-configure (just basic settings)and test the...

@GeorKhawam C58HP has 10/100 mbps ethernet ports by design, like many other members of the Archer AC family routers: A2 C20 C50 C60 A5 C24 A/C54 C58 I imagine that the benefit with these models could...

@Akarv Make sure that you're with the latest FW release for MR200 HW v4, which is v1.19.0.0.9.1. This setting should suffice, but the bad news is that you can't use the Remote Management, because...

Kevin_Z wrote terziyski wrote @Kevin_Z Hi Kevin, can you confirm if a OneMesh ON/OFF switch button was implemented in the newly released FW for Archer C64 (v1.11.0 ) ? Is the port range forwarding...

@Akarv Follow this guide for troubleshooting your issue. If that still doesn't work you can use the MR200 remote management: Go to Advanced > System Tools > Administration page. Locate the Remote...

@Giff As far as I know you have to setup the correct PPPoE settings when in 'wireless router mode': Provided you use FTTP and do not have BT Digital Voice. You will need to enter the correct login...