@rigid_spoon Have you done this test from an external network (mobile or other ISP): http://<your_public_ip_address> Also make sure that your Internet IP address matches your public IP address here:...

@andretenenbaum That would be connecting the Archer C6 in AP mode - Case 1. Connect the ethernet cable to the C6 WAN (Internet) port.

@Faaiz Some routers have their Operation Mode menu under System Tools. Check there and if you still can't find it, try opening the C20 WebGUI in a web browser (like Mozilla) from a computer to see if...

@Dr.Mandeep Check this post - it's for HW v2, but I assume that this is also valid for HW v3.

@iAmSaugata Usually this error message: "Confliting with existing port." appears when the UPnP has opened a port, but you're trying to open the same port via Port Forwarding as well. The router UPnP...

@SalinaSJames You could configure almost any home router to work this way - it's called access point mode. And the answer on your both questions is: Yes. While switches work on Layer 2, the routers...