@natsbar Configure the schedule reboot while in router mode and then switch to AP mode. The device should retain these settings. Refer this FAQ.

@Trunks04 . Use this guide (Case 1) for configuring the second AX20 in AP mode. Connection between the two routers should be AX20 (in router mode) LAN port => AX20 (in AP mode) WAN port

@pajser92 Well, it seems that there's no other option but to use the first scenario. Although there's a beta FW release for C6 v2 EU region here. You can upgrade and test but if it doesn't resolve...

@pajser92 You misunderstood my second proposal. I've meant changing your ISP "Internet connection" DNSs from default to 8.8.8.8 and 1.1.1.1 (if that's possible in the ISP router). That's different...

@pajser92 This has been observed before and the reason for that is unknown - check this thread for reference. If your ISP router has address reservation option you can expand its DHCP server pool to...

@ShadyAtef94 Make a configuration backup. Reset VR600 to factory defaults and check again: The reset button is on the left side of VR600 when in front of the device - use a paperclip or a toothpick....