@LukasKarlik Lets try something else: According to your EC230-G1 LAN subnet (for example if it is 192.168.0.0/24) make the following settings. Change DHCP IP address pool and make an IP address...

@ComTPEn Here's a guide on how to upgrade your router's FW manually. Just make sure the FW region and HW version downloading match your device bottom sticker.

@danezeq Here's the Archer C6 v3.2 datasheet - you can clearly see the WPS/Wi-Fi button on the back of the router. " WPS/Wi-Fi On/Off Press this button, and immediately press the WPS button on your...

@Ih8snow WR940N can be accessed via web browser with the default local administrator credentials admin/admin if you haven't changed them. WR940N can be accessed with the Tether app (on your mobile)...

@neekan If you're bridged to the AX1500 then the IP address on AX1500's WAN port should match the browser's IP address. If you use the ISP modem/router as a main router then it's WAN should match the...

@jimjoe Yes, both of your routers DHCP servers are assigning an IP addresses in their LAN subnets. For example your ISP router's DHCP may assign IP addresses in 192.168.0.1-192.168.0.100 space (just...