@donthediyer According to the OneMesh compatible devices list it is. OneMesh is introduced in the Archer AX10_V1_210420 FW release.

@josa It's the latter - the 2.4 GHz devices are not isolated from 5GHz. If you want to have access between the two laptops just put them on different bands. The AP isolation works within bands, not...

@Ebarlev In this thread you can see an official answer about the VR600 wireless performance. Since this setup is already proved working, I would test first and then re-configure if there are any...

In this setup the 'HTTP referer Head Check' feature on Archer C64 (secondary router) is used to make this possible. This setup should work when Archer C64 (secondary router) is set either in wireless...

Ebarlev wrote @terziyski It works ! I have connected the vr600 to the fiber-router from LAN1. I previously didn't turn off the dhcp and now I did and the vr600 works like a charm! Some things, though...

@Mokgoro Follow this guide for setting up your W8691N as an access point and see if this will work for you.