@Fuzzydark Just set ' ICMP flood attack filtering to 'OFF' or 'LOW' and test if the issue persists - that's the fastest way to know if this settings is causing the issue. If there's no hosts in the...

@ZAI07 I am using the older FW version (1.5.8 Build 210609 Rel.60832n(4555)) and the router time setting is OK after restart. Try to set the time via router's WebGUI - open a browser at...

@Nasdak The topologies in the screenshot are really confusing. If you want to avoid the double NAT, you trust your friend and he is using a pfSense to provide an internet connection for you then :...

@SalinaSJames Yes, you could do that easily. Using a WR840N or WR841N (they both support AP mode). Use the following guide to configure the device you choose in AP mode - Case 1. Just set its LAN IP...

@xCS Try this thread's solution and check if these steps will resolve your issue (in particular disabling UPnP and rebooting the device).

@Ebarlev As David-TP posted you've configured VR600 in 'wireless router mode'. While this should work you'll introduce a double NAT in your network. If you want to avoid that leave the VR600 in 'DSL...