@burgerLover I assumed that you have an ISP modem/router in your network to which you connect your C7. If you plug the C7 in your wall socket and you don't have any ISP device before your C7, I...

@hawai36 You could try the beta FW for your device from this thread - select the correct release according to your FW region. If you don't use OneMesh feaure disable it (there's an ON/OFF switch in...

@burgerLover If you have an ISP modem/router before the C7 which does NATing, to avoid the double NAT you should set C7 in AP mode (Case 1). When set in AP mode, C7 won't do the NATing. If that...

@AmazingMiki If you have set IP & MAC Binding for this device just delete the binding entry and reboot the router: After the reboot check if everything's OK.

@TijnK They should work together just fine. See the OneMesh compatible PLCs and the OneMesh FAQ - Q9/A9.

@Riche34 Check what's the type of the Internet connection of your BT home hub. If it's different that these that VR2100 supports then that's the reason: Another reason may be a specific VLAN that...