@DawidM Except the WebGUI and the Tether app there's no other way to do that. Your best bet is the reboot scheduler.

@velin98 If you use the device in wireless router mode you should have that feature (unless it has been removed in the latest FW release): The other two modes (AP and RE) don't support Bandwidth...

@Perennial Yes, there is. For this to be possible you should disable Smart Connect feature. Only then you'll have the oportunity to select a particular channel for 2.4GHz and 5GHz bands.

@Icxsas What has most probably happend was when you've restored the router configuration from the old baclkup file (which is created with an older FW release) the router refused to let you in into...

@JC0309 I thought you're building Deco Mesh. Using AX90 with C6 in AP mode won't give you a mesh network. M9+ is quite more powerful device that C6. One reason for instability could be a strong...

@George_L What I would try is to configure 802N like this (Chapter 7 in the user guide): In this case the 802N DHCP server would be disabled according to its user guide - Chapter 7.8.1. 802N wireless...