@BolozinAction Turn Smart Connect off and you'll be able to see the wireless channel and channel width. When this feature is activated the settings in question are not available. You might want to...

@ViVA_12213 A similar question has been answered in this thread.

@Kayser Look at the bottom sticker of the device. There you should see the FW region of your device. Like I posted, if it's US version you can update it that manually - Case 1.

@Dan75 Try connecting VR1600v LAN1 port to AX3000 WAN port (Dynamic IP) and test. If you are concerned about the double NAT you can put AX3000 in AP mode.

@MuraliBijjur These logs are concerning: 2021-08-20 15:50:38 Led Controller ERROR [1091] Config importing failed 2021-08-20 15:50:38 Led Controller DEBUG [1091] Failed to read USB3 It's quite...

@Kayser If your FW region is US, then you can upgrade the device FW to the latest version which is 1.1.8. After updating FW, disable OneMesh feature if you're not using it and test the wireless...