Team, The "PPSK without radius" option allows me to attach WiFi endpoints to a specific vlan without using an extra SSID. Which works as expected when there is an actual vlan specified. However, the v

All, I'm working on a business case for replacing the ER7206-V1 with ER707-M2 (versus replacing with ER7206-V2). Part of the equation is power usage. The specs of the 707-M2 say 7.1 Watts without USB

Team, It looks like the router ports are not supporting EEE (EEE equals power saving). This is based on the output of "ethtool -show-eee eth0" from a Linux device connected to the router. The ethtool

Team, I have a customer who needs up to 6 routers on a (DC-)site. Each of these routers will have their own public IP (wan) and their own subnet (lan) This is for redundancy and performance reasons. H

Team, I have a device connected to a ER7206 router. And according to the log on the controller, it is disconnecting every 5 minutes. The device then reconnects a few minutes later. This behavior is no

Team, I have a customer with 5 public IP addresses; all within the same subnet (i.e. /29 - 255.255.255.248). Lets assume these adresses are 90.70.50.202-206. I would to use 3 of these on a ER605 witho