This guide will show you how you can create stateful ACL rules with fine grained IP-Group and IP-Port Group control. Required: Omada Gateway and at least one Omada switch at the core of the network. T

The ER706W hardware version is actually 1.20 The ER706W is new (less than a week old) and I have tried to reboot the router twice from the GUI in standalone mode. Each time, the router has failed to r

At the moment, Gateway ACL rules don’t support defining groups based on IP and port combinations or similar criteria. I believe this is important for enabling communication between isolated VLANs, esp

The ER706W does not have a specific "client list" feature as found in most other routers, including the Tp-Link home routers. This is most inconvenient, especially when client names can not be edited

My ER706W exposes a hidden WiFi network, 5GHz range while in standalone mode. TP-Link explanation says 'The hidden wireless network is used to build up the mesh wireless network system', although this

Using the Omada app (v3.24.36) for iOS, I could not configure a VLAN ID for a newly created SSID. It was necessary to later connect with a PC to the EAP610 and configure the VLAN ID. Please consider a