TP-Link WR940N dashboard access

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TP-Link WR940N dashboard access

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TP-Link WR940N dashboard access
TP-Link WR940N dashboard access
2020-02-18 10:34:00 - last edited 2020-02-19 14:36:07
Model: TL-WR940N  
Hardware Version: V1
Firmware Version:

I'm unable to access router (TP-Link WR940N) dashboard to change the default password and name.
How can I do it ?

  0      
  0      
#1
Options
1 Accepted Solution
Re:TP-Link WR940N dashboard access-Solution
2020-02-19 14:24:30 - last edited 2021-08-22 06:48:24

@Jess1ca 

Follow the steps to login the router’s web interface :
1 – Make sure you are connected to the router’s network .
2 – Open your web browser and visit gateway IP : 192.168.0.1.
3 – A window prompts for a Username and Password.
4 – Enter the router’s Username : admin and the Password admin.
5 – You will now be logged in, now you can make changes according to your requirements.
TP-Link Router Login Details

Recommended Solution
  1  
  1  
#5
Options
4 Reply
Re:TP-Link WR940N dashboard access
2020-02-18 12:38:57
Several ways but the best is to connect a PC direct to the router using a good Ethernet cable, sign on to your browser and enter the IP address or link printed on a label on your router. The default domain name of the TL-WR940N is http://tplinklogin.net, the default IP address is 192.168.0.1. See chapter 3 https://static.tp-link.com/resources/document/TL-WR940N_V1_UG_111228.pdf. If those do not work, then you may need to reset the router to factory specs first.
  0  
  0  
#2
Options
Re:TP-Link WR940N dashboard access
2020-02-19 12:34:43

@Jess1ca 

Go to the any browser and type http://192.168.1.1 or http://192.168.0.1 or http://tplinklogin.net and then enter your LAN IP of your router model.

after this enter your admin and password. after entering both of column, you can see at left side security>remote managment, Click on this link. now the remote managment is disable, now you can change easily the remote managment ip address form 255.255.255.255. if you can't able to resolve the issue then click on this link to get more information to reolve your issue. 

 

  0  
  0  
#3
Options
Re:TP-Link WR940N dashboard access-Solution
2020-02-19 14:24:30 - last edited 2021-08-22 06:48:24

@Jess1ca 

Follow the steps to login the router’s web interface :
1 – Make sure you are connected to the router’s network .
2 – Open your web browser and visit gateway IP : 192.168.0.1.
3 – A window prompts for a Username and Password.
4 – Enter the router’s Username : admin and the Password admin.
5 – You will now be logged in, now you can make changes according to your requirements.
TP-Link Router Login Details

Recommended Solution
  1  
  1  
#5
Options
Re:TP-Link WR940N dashboard access
2020-02-19 21:04:29
The default IP address for that router is 192.168.0.1.
  0  
  0  
#6
Options