Home Network Community > Wi-Fi Routers > AX-10 plus 3x RE505X in MESH - not using LAN back-haul?
< Wi-Fi Routers

AX-10 plus 3x RE505X in MESH - not using LAN back-haul?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AX-10 plus 3x RE505X in MESH - not using LAN back-haul?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AX-10 plus 3x RE505X in MESH - not using LAN back-haul?
AX-10 plus 3x RE505X in MESH - not using LAN back-haul?
2021-09-01 17:46:18
Model: Archer AX10  
Hardware Version: V1
Firmware Version: 1.2.1 build 20210513

Hi

 

I configured my AX10 and 3 RE505X devices successfully to be a MESH. However, it does not look like the RE505's are using the LAN, but are instead trying to use the WiFi to communicate with the AX10. I base this on the fact that:

a) All 3 devices have a red light on the "wifi" icon on the device itself, and 

b) when connected on one of the RE505's ( I *think* I am connected to one of them at least) - the throughput speed is very low.

 

IS there a way that I can force the RE505's to use the LAN conection, and is there a way for me to see to which device I'm actually connected?

  0      
 
  0      
 
#1
Options
4 Reply
Re:AX-10 plus 3x RE505X in MESH - not using LAN back-haul?
2021-09-02 06:44:42

Update:

 

this morning, after a long struggle to figure out why the network is excruciatingly slow, I eventually tracked it to the RE505X units - and in particular, the fact that they are connected to the LAN via cable as well. I had to remove the LAN cable from the units before the network speed returned to normal.

 

Can someone please help me - is there something specific that needs to be done when connecting/configuring the RE505 to be part of the MESH? In all the marketing material, it states that for extender function, you simply plug the RE505 into the LAN, but it seems this is not compatible if you want to use it as part of the mesh instead?

  0  
  0  
#2
Options
Re:AX-10 plus 3x RE505X in MESH - not using LAN back-haul?
2021-09-02 09:15:28

@Piie 

 

Hi, the OneMesh™ products can’t support the ethernet backhaul, which means the RE505X can only build up a Onemesh network with the AX10 via Wi-Fi. Follow this guide to confirm the connection and configuration are correct on both the AX10 and RE505X:

https://www.tp-link.com/support/faq/2507/

 

Visit this story to know more about Onemesh: https://community.tp-link.com/us/home/stories/detail/722.

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#3
Options
Re:AX-10 plus 3x RE505X in MESH - not using LAN back-haul?
2021-09-02 12:43:44

@Kevin_Z 

Thanks for the clarification - I guess it is what it is - and to be honest, it's disappointing since I'm assuming that each of the RE505x devices must then be within WiFi coverage of the router - or can they daisy chain off each other? The furthest room in my house is not within range at all - so how do I get the MESH to extend further?

  0  
  0  
#4
Options
Re:AX-10 plus 3x RE505X in MESH - not using LAN back-haul?
2021-09-03 05:35:43

@Piie 

 

Refer to Q6/A6, which means yes, you can connect one extender to another if it requires to be in that way.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 1000

Replies: 4

Related Articles
 Problems with an Archer AX 10
895 0
 AX 10 slow speeds
141 0
Mix ac and ax mesh routers?
1266 0
 Is the AX1500 RE505X an AX Wi-Fi 6 device?
1926 1
determine if clients are actually using AX capability
1280 0
 RE505x
685 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.