Home Network Community > Deco > Deco won't assign IP address to 100mbps devices
< Deco

Deco won't assign IP address to 100mbps devices

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco won't assign IP address to 100mbps devices

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco won't assign IP address to 100mbps devices
Deco won't assign IP address to 100mbps devices
2021-12-15 11:14:26
Model: Deco M9 Plus  
Hardware Version:
Firmware Version: 1.2.12 Build 20191014 Real. 42025

I have 4 deco M9+ in my home running on backhaul on my Cat6 wired network with ~30 devices connected between wifi and Wired. After a firmware upgrade, (I'm not sure which one) 2 devices.

 

My hue and Arlo Hubs have both intermittently not been assigned IP addresses since they upgrade . then some days on they both magically get an address and some weeks later will be removed. (they have been working in situ prior)

 

I've tried assigning a static IP to the device to no avail. The only similarity I can see is that they are both 100mbps devices. All my other wired devices are on 1000MBPS and working just fine

 

 please advise

  0      
 
  0      
 
#1
Options
4 Reply
Re:Deco won't assign IP address to 100mbps devices
2021-12-15 19:31:09

@breeno 

 

I assume by 100Mbps you are referring to these devices being only 2.4GHz devices.  If that is correct then you can try one of the two things 

 

1.  disable Fast Roam.  This feature can sometime affect older 2.4GHz only devices or devces that stay stationary. 

2.  Enable the Guest network on 2.4GHz only and see if the devices connect.  If they do then enable the 5GHz on the Guest network and see if they stay connected.  If so then you could add them to the main network doing the same process.  Disable 5GHz and connect devices to 2.4GHz and then re-enable 5GHz

Check out the Latest: Recent Smart Home Features and Updates for Tapo and Kasa Securing Your TP-Link ID with 2FA:Deco and Tether | Smart Home Splash into a Smarter Summer with Sub-G Sensors, Matter, and Apple Home!
  0  
  0  
#2
Options
Re:Deco won't assign IP address to 100mbps devices
2021-12-16 00:48:43

@Carl 

 

Neither of the devices are running on wifi. They are both 100mbps ethernet connections (and don't have a wifi option as they are IOT hubs) all my wifi and 1000mbps ethernet devices are working just fine. I've tried 3 different switches (2 of them from TPlink) as well with the same outcome. To iterate. this is a new problem post a firmeware upgrade. I have been using the same set up for years with no issues

 

 

  0  
  0  
#3
Options
Re:Deco won't assign IP address to 100mbps devices
2021-12-16 17:25:35

@breeno 

 

Okay I didn't understand you were talking about hardwired devices.  In you last response you mentioned using switches.  Did you attempt to connect via a direct Ethernet connect as well, just to rule it out.  I know you mentioned you tried multiple switches but this will be a question the software team will ask when I present this concern to them.  Also are there any logs from the unit you can share when the two clients are connected to see if there is a reason why they are being rejected IPs?

Check out the Latest: Recent Smart Home Features and Updates for Tapo and Kasa Securing Your TP-Link ID with 2FA:Deco and Tether | Smart Home Splash into a Smarter Summer with Sub-G Sensors, Matter, and Apple Home!
  0  
  0  
#4
Options
Re:Deco won't assign IP address to 100mbps devices
2021-12-17 00:42:30

@Carl 

 

hi Carl. Yes. I've tried connecting directly to the deco with the same outcomes.

 

the 3 different switches I've used are

 

1 - Dlink DGS-1024D

2 - LS1008G (I bought to solve an issue between the dlink and the deco's)

3 - TL-SF1024 (I bought in an attempt to resolve this issue)

 

I've also swapped the cables 

 

There are no logs from either of the devices unfortunately. Another frustrating factor is that the issue is intermittent. no IP address assignment for a period then it assigns.. some time later (I'm guessing after lease expiry) they are removed once more for another period. One of the devices allows for manual addresses which I have done for now. (whilst I have a connection to it) the other however only supports DHCP. I'll observe if that resolves for at least one device. Neither device supports wifi as they are IoT devices

 

thanks

 

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 730

Replies: 4

Related Articles
 IP Address Reservations
1602 0
 Added Deco M9s not showing IP address nor clients
259 0
Setting static IP address for individual devices
639 0
 View Devices IP Address
5309 0
 Deco M9+ -devices failing to receive dhcp address
565 0
 Can't assign smart plug/switch on Deco
446 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.