AX73 as AP with static IP = no DNS

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AX73 as AP with static IP = no DNS

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AX73 as AP with static IP = no DNS
AX73 as AP with static IP = no DNS
2022-04-04 19:22:13
Model: Archer AX73  
Hardware Version: V1
Firmware Version: 1.2.0 Build 20211222 rel.74632(5553)

I have two AX73 routers setup in Access Point mode and set with a static IP address outside the DHCP scope . DHCP is turned off on the AX73's so it is a pass-through from the main cable modem/router. All the AP clients get their DHCP leases correctly from the main router and can access the internet without a problem. The issue I'm seeing is that WAN led is orange that I assume because there is no DNS entry option when setup with a static address. There is no automatic firmware checking and it won't sync the clock since it can't resolve the time server either.  Every other brand router I've configured has DNS as an option when configured with a static IP.

 

I'm getting nowhere with emailing support and wondering if anyone has come across this or if I'm missing something.

 

TIA

  0      
  0      
#1
Options
4 Reply
Re:AX73 as AP with static IP = no DNS
2022-04-11 11:38:29

@Qurius 

 

Can you confirm how did you configure the two AX73s to be Access Points? Case 1 or Case 2:

Configure the TP-Link wireless router as Access Point?

 

It's suggested to try Case 1, and leave the IP settings by default, then check if the issues will go.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:AX73 as AP with static IP = no DNS
2022-04-11 13:12:33

  @Kevin_Z  The AX53 has the option to switch modes. It is configured in Access Point Mode as described in Case 1.  As I mentioned if it is set to DHCP for the interface the WAN light is green. When the interface is set to static the WAN light is orange and and an explanation point appears for the Internet on the Home page. 

  0  
  0  
#3
Options
Re:AX73 as AP with static IP = no DNS
2022-04-11 15:56:01

  @Kevin_Z  btw here is what shows in the log for the LED controller:

 

2022-04-11 07:34:48 Led Controller INFO [1134] Start to run WAN1_OFF

2022-04-11 07:34:48 Led Controller INFO [1134] Start to run WAN0_ON

2022-04-11 07:34:48 Led Controller INFO [1134] Start to run LAN_ON

2022-04-11 07:34:46 Led Controller INFO [1134] Start to run WAN1_OFF

2022-04-11 07:34:46 Led Controller INFO [1134] Start to run WAN0_OFF

2022-04-11 07:34:46 Led Controller INFO [1134] Start to run LAN_ON

2022-04-11 00:11:07 Led Controller INFO [1134] Start to run WAN1_OFF

2022-04-11 00:11:07 Led Controller INFO [1134] Start to run WAN0_ON

2022-04-11 00:11:07 Led Controller INFO [1134] Start to run LAN_ON

2022-04-11 00:11:05 Led Controller INFO [1134] Start to run WAN1_OFF

2022-04-11 00:11:05 Led Controller INFO [1134] Start to run WAN0_OFF

2022-04-11 00:11:05 Led Controller INFO [1134] Start to run LAN_ON

  0  
  0  
#4
Options
Re:AX73 as AP with static IP = no DNS
2022-04-12 03:07:30

@Qurius 

 

Is there a reason why you need to set a static IP address for the AX73? You can leave it by DHCP, then configure an Address Reservation for it on the host router, will it help?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#5
Options