Home Network Community > Deco > Deco X55 Ethernet port
< Deco

Deco X55 Ethernet port

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco X55 Ethernet port

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco X55 Ethernet port
Deco X55 Ethernet port
2022-04-18 22:25:07 - last edited 2022-04-19 10:49:29
Model: Deco X55  
Hardware Version:
Firmware Version:

I use 1 of the 3 ports on the X55 to deliver a 1GB connection from router.

I then use one of the other 2 ports to drive my PC, hoping to get a 1GB ethernet connection - but to my surprise it only delivers 515MB from that port. If I connect directly to my router I get the full 1GB (980GB).

Are these not 1GB ports?

Also my wifi from the Deco55 goes to only 308GB while direct from my router the wifi gets up to 338GB (for these test they are placed one next to the other).
Do you guys have similar numbers ? 
Do you know how to improve these numbers?

 

  2      
 
  2      
 
#1
Options
1 Accepted Solution
Re:Deco X55 Ethernet port-Solution
2022-04-19 02:28:39 - last edited 2022-04-19 10:49:29

  @dfurshpan 

Welcome to the community.

Here are some suggestions for you:

1. Please go to Deco APP>HomeShield>Prioritize your devices and make sure the QOS is disabled or set to 1000/1000 M/s.

2. Turn off the 2.4ghz on the Deco and check the wireless speed of 5ghz again.

3. Turn off the UPNP under Deco APP>More>Advanced.

 

While if the speed had no improvement, could you please send an email to support.forum@tp-link.com(please add the forum ID544792) with the following information:

1. May I know who is your internet service provider and how about the model number of your cable modem?

2. Please add some screenshots of the speedtest on the PC when it is wired to Deco X55 and please also help me check the link speed on the Ethernet connection.

3. The wireless 5ghz speedtest result and the wireless link speed as well.

 

So that I could forward your case to the senior engineers for further assistance.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.
Recommended Solution
  5  
  5  
#2
Options
5 Reply
Re:Deco X55 Ethernet port-Solution
2022-04-19 02:28:39 - last edited 2022-04-19 10:49:29

  @dfurshpan 

Welcome to the community.

Here are some suggestions for you:

1. Please go to Deco APP>HomeShield>Prioritize your devices and make sure the QOS is disabled or set to 1000/1000 M/s.

2. Turn off the 2.4ghz on the Deco and check the wireless speed of 5ghz again.

3. Turn off the UPNP under Deco APP>More>Advanced.

 

While if the speed had no improvement, could you please send an email to support.forum@tp-link.com(please add the forum ID544792) with the following information:

1. May I know who is your internet service provider and how about the model number of your cable modem?

2. Please add some screenshots of the speedtest on the PC when it is wired to Deco X55 and please also help me check the link speed on the Ethernet connection.

3. The wireless 5ghz speedtest result and the wireless link speed as well.

 

So that I could forward your case to the senior engineers for further assistance.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.
Recommended Solution
  5  
  5  
#2
Options
Re:Deco X55 Ethernet port
2022-04-19 10:52:31

  @David-TP 

QOS and UPNP setting solved the X55 wired 1GB ports.

disabling 2,4 Ghz yields no changes/improvements.

What is the expected Wifi when feeding the Deco X55 1GB of wired internet ?

  0  
  0  
#3
Options
Re:Deco X55 Ethernet port
2022-04-20 01:24:51 - last edited 2022-04-21 08:29:14

  @dfurshpan 

Hi, For the wireless speed, it might depend.

Deco X55 is capable of Wi-Fi 6(the maximum link speed of 5Ghz is 2402 Mbps), and if your client is Wi-Fi 5 only(Link speed-866m/s on 5ghz), the wireless speed could reach 500-600m/s from the main Deco.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.
  1  
  1  
#4
Options
Re:Deco X55 Ethernet port
2022-04-21 02:14:19

  @David-TP 

My desktop testing images are attached (433 MB/s your way, 303MBps using bandwidth testing).

I also including few images showing my phone (galaxy s20).

- using bandwidth test - 481 Mbps

- deco that reports it uses 5G

- A read from the phone wifi that reports on 960Mbps

 

I had to zip these 4 images since i was allowed to attach one file only

Thank you

File:
Deco bandwidth.rarDownload
  0  
  0  
#5
Options
Re:Deco X55 Ethernet port
2022-04-21 08:55:48

  @dfurshpan 

Hi, for the laptop, I think the speed is ok since the link speed on the computer is only 433m/s.

On the Galaxy S20, the speed should be a little more about 600-700m/s and I see the link speed is only 960m/s, how far is it from the smartphone to the main Deco X55?

Maybe you could test it again about 10 feet away?

And have you tried to test the speed via SpeedTest APP, not the website? and also change a different speed server?

Thank you.

Best regards.

 

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.
  0  
  0  
#6
Options

Information

Helpful: 2

Views: 3203

Replies: 5

Related Articles
Deco x55 V 1.26 Ethernet ports malfunctioning
903 0
 Deco x55 port keeps dropping out
821 2
Is the Ethernet port on M5 Deco a 1GBS port?
984 0
 Deco X55(AX3000) speed reduces - over ethernet
232 0
Deco App and Units (X55/X60) not connecting via ethernet
1589 0
DECO X55 Frequent automatic reboots
782 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.