Home Network Community > Wi-Fi Routers > Connectivity to 192.168.100.1
< Wi-Fi Routers

Connectivity to 192.168.100.1

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Connectivity to 192.168.100.1

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Connectivity to 192.168.100.1
Connectivity to 192.168.100.1
2022-08-05 18:58:58 - last edited 2022-08-05 19:01:59
Model: Archer AX90  
Hardware Version: V1
Firmware Version: 1.1.8 Build 20220321 rel.13967(5553)

Hi,

 

Maybe a basic question but I am stumped....

 

Setup motorola MB8600 cable modem ethernet connected to the wan port on the AX90.... LAN is 192.168.0.1  255.255.255.0    Cable modem admin interface is 192.168.100.1

 

I cannot reach the admin page on the modem... I can TraceRoute and Ping 192.168.100.1 But no Http.... Is there a routing issue here or is the modem blocking the return HTTP, or ????  I really don't want to re-IP my network to the 192.168.1.1 space if I dont have too....

 

Any help or even sarcastic comments welcome...

 

Thanks!

  0      
 
  0      
 
#1
Options
5 Reply
Re:Connectivity to 192.168.100.1
2022-08-08 08:54:05

@liddown 

 

It should be accessible when the cable modem is directly connected to the AX90 WAN and your computer or phone is connected to the AX90 directly.

 

Have you tried with other client devices that connect to the AX90?

TP-Link Annual Community Survey | Help Shape Our Community Throughout 2024!
  0  
  0  
#2
Options
Re:Connectivity to 192.168.100.1
2022-08-08 14:06:35 - last edited 2022-08-08 14:09:19

  @Kevin_Z 

 

Thanks for the reply Kevin!

 

Yes, the modem is connected to the WAN port of the AX90, and yes I have tried to access it from both wired and wireless computers connected to the AX90... I can access other client devices (Computers via screen sharing, Synology NAS client admin, etc) that are also connected to the AX90 without any issues...

  0  
  0  
#3
Options
Re:Connectivity to 192.168.100.1
2022-08-09 02:03:54

@liddown 

 

Thank you for getting back with the detailed info.

 

To assist and figure it out efficiently, I've forwarded your case to the TP-Link support engineers who will contact you with your registered email address later. Please pay attention to your email box for follow-up.

TP-Link Annual Community Survey | Help Shape Our Community Throughout 2024!
  0  
  0  
#4
Options
Re:Connectivity to 192.168.100.1
2022-08-09 14:35:54

  @Kevin_Z  Thanks!! Email received...

  0  
  0  
#5
Options
Re:Connectivity to 192.168.100.1
2022-08-22 07:08:48

Hello @liddown 

 

I'm wondering if it will help by changing the AX90's LAN IP address from 192.168.0.1 to 192.168.1.1, then saving and rebooting it. Please give it a go and confirm. Thank you.

TP-Link Annual Community Survey | Help Shape Our Community Throughout 2024!
  1  
  1  
#6
Options

Information

Helpful: 0

Views: 957

Replies: 5

Related Articles
Any way to disable the AX10 from first going to tplinkwifi.net instead of 192.168.1.1?
2246 0
AX11000 won't access 192.168.100.1
1216 0
HELP! cannot get to 192.168.0.1
4097 0
IpV6 connectivity with iOS devices, no IpV6 connectivity with Windows pc
1317 0
setup a static route to 192.168.100.1 with M5
735 0
How to Change IP 192.168.68.1 to 192.168.1.1
375 2
About Us
Press
Copyright © TP-Link USA Corporation. All rights reserved.