Home Network Community > Powerline Adapters > Upgraded from TL-PA7017P (AV1000) to TL-PA9020P (AV2000). Lost 90% of my throughput.
< Powerline Adapters

Upgraded from TL-PA7017P (AV1000) to TL-PA9020P (AV2000). Lost 90% of my throughput.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Upgraded from TL-PA7017P (AV1000) to TL-PA9020P (AV2000). Lost 90% of my throughput.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Upgraded from TL-PA7017P (AV1000) to TL-PA9020P (AV2000). Lost 90% of my throughput.
Upgraded from TL-PA7017P (AV1000) to TL-PA9020P (AV2000). Lost 90% of my throughput.
2022-09-17 05:56:48
Tags: #Powerline
Model: TL-PA9020P KIT  
Hardware Version: V4
Firmware Version: 3.2.4_902104_190506_901

I have been using a TL-PA7017P-KIT (AV1000) for a couple of years and had no issue reaching well over 600Mb/s.  I recently upgraded to a TL-PA9020P-KIT (AV2000) and have been unable to achieve anything greated than approx 180Mb/s.

 

The devices were replaced in the same outlet with the same equipment.  Nothing was changed except for unplugging them and plugging in the new ones.  I have been unable to remedy the speed issues.

 

I CAN HOWEVER replace the new devices with the original and they work just as good as before.

 

I only upgraded for the speed increase and the extra network port.

 

I have read every post I can find relating to these adapters and/or speed/throughput issues and have yet to see a solution.

 

How can this be remedied?

 

  0      
 
  0      
 
#1
Options
2 Reply
Re:Upgraded from TL-PA7017P (AV1000) to TL-PA9020P (AV2000). Lost 90% of my throughput.
2022-09-19 07:14:17 - last edited 2022-09-19 07:42:18

  @Dev-Null 

Thank you for the feedback, can you share the photos of powerline rate in tpPLC Utility of the PA9020P and PA7010P when they work sperately. 

May I know, did you test the kit separately. e.g unplug the TL-PA7017P kit and plug in the new kit

 

You could refer to FAQ below to remove the factors that could affect the powerline rate as guide below

What can I do if my powerline rate is very low?

Try to plug the main/ extender in a different wall outlet and see if that makes any difference

You could also  put TL-PA9020P into the same room, or same power board and check what's the powerline rate at that time. 

 

At the same time,   May I know the network topology including the model of modem & router, do you use a VDSL modem?

 

Share Your Pet Story, Win Free Tapo Care. Smart Action 2.0 Explore and meet the next level home automation.
  0  
  0  
#2
Options
Re:Upgraded from TL-PA7017P (AV1000) to TL-PA9020P (AV2000). Lost 90% of my throughput.
2022-09-27 09:19:18

 Hello  @Dev-Null 

May I know did the problem get solved later? Feel free to let us know for any observations, thank you. 

Share Your Pet Story, Win Free Tapo Care. Smart Action 2.0 Explore and meet the next level home automation.
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 585

Replies: 2

Tags

Powerline
Related Articles
Will the AV2000 2-port Gigabit TL-PA9020 be available again?
614 0
No internet from TL-PA9020P kit powerline adapters
565 0
TL-PA9020P Operating temperature range
779 0
tl-pa9020p kit v4 vs v3
358 0
Adds on for TL-PA9020P kit
596 0
TL-PA9020P not responsive and unable to be reset
1249 0
About Us
Press
Copyright © TP-Link USA Corporation. All rights reserved.