New Release Deco X50/X55 V1 1.2.0 with VPN/Static Route/MTU
Hey Everyone!
We are excited to announce that the official firmware version 1.2.0 for the Deco X50 and X55 V1 was released last week. Many of our community's most anticipated features were added in this update, such as VPN server/client configuration, MTU customization, IoT networking, and Static Routing Options.
Please Update through the Deco App or Web Interface, or Download the Official Firmware From Your Product's Download Page
FAQ: How to Update a Deco's Firmware
Release Notes:
New Features:
1. Support for VPN Server Features, Including OpenVPN. PPTP VPN, and L2TP/IPsec VPNs
2. Support for VPN Client Features, Including OpenVPN. PPTP VPN, and L2TP/IPsec VPNs
3. Support for Static Routing (Deco App > Advanced)
4. Added the ability to customize the MTU size (Deco App > More > Internet Connection > Internet Connection Type)
5. Added IoT Network Function
* The following features(6-12) are also supported:
6. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
7. Added support for customizing Satellite Deco Signal Source under Deco App > Internet > Select the Satellite Deco > Signal Source.
8. Added support for customizing clients' Connection Preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
9. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS.
10. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP.
11. Added a prompt notification when the Ethernet link rate goes down to 100Mbps.
12. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
Improvements:
1. Optimized the MAC Clone function.
2. Improved system reliability and security.
Note:
1. The Advanced features need to be configured on the Deco APP, and please make sure your Deco APP is up to date.
2. Some new features would not be available when the router is working in Access Point mode.
3. The firmware downgrade needs to be performed by firmware recovery. >>How to use firmware recovery on Deco
4. Some Features may require every node on the network to be compatible with a feature. If a feature does not appear, please wait for an update adding support to the other deco models on your network.
Please feel free to comment below if there is any question about the new firmware.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello @Riley_S
When will these updates, specifically the VPN update come to the XE75? Just got this last week and realized it doesn't have this, yet. Is this in the works for the newer deco hardware?
- Copy Link
- Report Inappropriate Content
The goal of the firmware with these features is to roll it out to as many models as possible. In fact, the feature is even being brought to some of our oldest deco models
The Deco X50/X55 were the absolute first Decos to receive the feature, as the developers often create firmware for these models first. Each week, different hardware versions and models receive these features, so you should be able to expect to see these features soon.
Unfortunately, our team has no real insights into what models will receive the firmware and when it may be available, so your best bet is to try and stay up to date with the most recent firmware listed on your product's download page. I do try to provide updates to the community whenever a model begins to receive the firmware.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 4469
Replies: 22
Voters 0
No one has voted for it yet.