@ChrisGtr 

 

So you have a 5Gbps service.  and a 10 Gbps network card.  What router do you have?  What type of ethernet ports does it have.  Also what type of Etherent cable are you using. 

usign cat7 gigaspire blast u10xe gs4237

has 5 ethernet ports, 1 is designated as 10g

  @ChrisGtr 

 

That is likely the issue right there.  If only 1 port is 10Gbps then it is most likely a WAN or LAN port.  Depending on what the other ports are you may have yourself a bottleneck.  For example if you use the 10 G port for the computer but your WAN connection to the modem is 1G then your internet speeds would be a max of 1Gbps.  

i have 1900 down and 800 ish up. only 1 is connected and that goes to this computer