How Do I turn down / decrease the transmit power on my Deco APs?

How Do I turn down / decrease the transmit power on my Deco APs?

How Do I turn down / decrease the transmit power on my Deco APs?
How Do I turn down / decrease the transmit power on my Deco APs?
2024-03-05 06:14:23
Model: Deco X20  
Hardware Version:
Firmware Version: 1.1.5 Build 20231026 Rel. 62511

Hi - my mesh network (4 APs) is 50 ft apart and mostly wired - but the seamless switching is far from seamless. In fact it's pretty bad at switching because signal strength is high but so is interference between floors. I need to toggle device wifi off & on to get it to switch APs. Which is why I would like to **use the feature pictured** to lower transmit power and encourage the devices to switch APs when on different floors. When they re-connect after toggling, they work great, they just overlap too much to signal to each other than - the one coming through the floor is not the one to use. 

b66a425bb5fd4505b97e3058ec535cc7

  5      
  5      
#1
Options
6 Reply
Re:How Do I turn down / decrease the transmit power on my Deco APs?
2024-05-26 23:38:35

  @sillywilly Same problem for me would be nice to turn the tx power down to reduce AP overlap

  0  
  0  
#2
Options
Re:How Do I turn down / decrease the transmit power on my Deco APs?
2024-07-17 08:58:07

Agree with this, I also have 4 and have them spaced logically to give best coverage. However my work laptop AX211 wifi, seems to like to jump nodes which causes me all sorts of problems (zscaler). I think if I could reduce the strength I could reduce these issues. I was quite surprised to not see any option for this, would be good if you could set on a per AP

  0  
  0  
#3
Options
Re:How Do I turn down / decrease the transmit power on my Deco APs?
2024-07-17 11:43:30

  @Mat-Moo What are those problems?

Did you activate fast roaming on the Deco?

  0  
  0  
#4
Options
Re:How Do I turn down / decrease the transmit power on my Deco APs?
2024-07-17 14:27:15
I've disabled it last night, trying everything but still seeing drop outs
  0  
  0  
#5
Options
Re:How Do I turn down / decrease the transmit power on my Deco APs?
2024-09-04 19:11:04

I have this same issue. The things that drop out the most are my TP-Link Kasa smart plugs and switches. I added another X55 to cover my gaps, but then I had too much interference on Zigbee. I would like to turn down the power to just cover the areas needed. I have 5 units.

  0  
  0  
#6
Options
Re:How Do I turn down / decrease the transmit power on my Deco APs?
2024-09-06 14:22:46

Maybe the problem is the configuration. My Decos are all wired together. So I am using them more as remote APs instead of a mesh. Can we turn off the Mesh so that they don't interact? But we also need to be able to turn down the power.

  0  
  0  
#7
Options

Information

Helpful: 5

Views: 828

Replies: 6

Related Articles