TL-SG108E does not respond to ping on http://192.168.0.1/

WhatsAppJack

2025-03-02 20:10:50

Posts: 3

Helpful: 2

Solutions: 0

Stories: 0

Registered: 2022-07-05

TL-SG108E does not respond to ping on http://192.168.0.1/

2025-03-02 20:10:50

Please help:

I just tried to enter the device config and it does not work. I reset the device by pressing the back button and same thing.

TL-SG108E came with a simple manual it says that config is at 192.168.0.1 but I can't access that and while I pinged it there is 100% packet loss and timeout.

Otherwise everything works, my network is all up, all devices see the internet, TV1 TV2, all PCs, cells etc. and the only issue I tried to troubleshoot was the printer, that needs its own unique ip.

Can someone please explain to me - why it does that?

1 Reply

terziyski

LV7

2025-03-06 16:38:05

Posts: 7520

Helpful: 5739

Solutions: 1386

Stories: 7

Registered: 2013-10-12

Re:TL-SG108E does not respond to ping on http://192.168.0.1/

2025-03-06 16:38:05

@WhatsAppJack

To configure your switch through a web browser on your PC, follow these steps:
1) Connect your switch to the network and connect your PC to the switch.
2) Find out the IP address of the switch.
■ By default, the switch receives an IP address from a DHCP server (or a router that
functions as a DHCP server) in your network. You can find out this IP address on the
DHCP server.
■ If the switch cannot receive an IP address from a DHCP server, it uses the static IP
address of 192.168.0.1, with a subnet mask of 255.255.255.0.
3) Configure IP address on your PC to make sure the switch and PC are in the same
subnet.
■ If the switch uses an IP address assigned by a DHCP server, set your PC to obtain an
IP address automatically from the DHCP server.
■ If the switch uses the static IP address of 192.168.0.1, configure your PC’s
IP address as 192.168.0.x (”x” ranges from 2 to 254), and subnet mask as
255.255.255.0.
4) Launch a web browser on your PC. The supported web browsers include, but are not
limited to, the following types:
■ IE 8.0, 9.0, 10.0, 11.0
■ Firefox 26.0, 27.0
■ Chrome 32.0, 33.0
5) In the address bar of the web browser, enter the IP address of the switch. Here we
suppose the switch uses the static IP address 192.168.0.1.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".

TL-SG108E does not respond to ping on http://192.168.0.1/

TL-SG108E does not respond to ping on http://192.168.0.1/

Information

Voters 0

Tags