Newbi Here

Newbi Here

Newbi Here
Newbi Here
2025-05-24 00:51:33

I have the business TP-link/Omada AX1800 Indoor/Outdoor access point.  I know this is a business AP, but I'm a simple home owner.  Here is the lay of the land.  My main router is inside my house.  I need to get a good signal to my barn and to spots between my barn and house for all my 33 CCTV cameras.  Would I mount this item on my house pointing towards my barn or would I mount it on my barn pointing to my house.  I've already put it on my barn and the highest speed I got from it was like 50 up and 50 down.  It's connect to a 1G enthernet cable.  So where should I mount it?

Thanks

  0      
  0      
#1
Options
1 Reply
Re:Newbi Here
2025-05-29 23:11:10

  @timlab55 

 

Make sure that the router port where EAP610-Outdoor is connected has been negotiated a speed of 1000 mbps.

The AP should be mounted on the barn pointing your house. You may need to play with its orientation for best wireless signal.

If you use your cameras on the 2.4 GHz band, AP will provide a bandwidth in these ranges 802.11n: 6.5 Mbps to 300 Mbps, depending on its signal strength and surrounding interference.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#2
Options