Home Network Community > Wi-Fi Routers > Archer AX20 router shows only orange LED, no WiFi
< Wi-Fi Routers

Archer AX20 router shows only orange LED, no WiFi

Archer AX20 router shows only orange LED, no WiFi

Archer AX20 router shows only orange LED, no WiFi
Archer AX20 router shows only orange LED, no WiFi
a week ago
Model: Archer AX20  
Hardware Version:
Firmware Version:

Hello everyone, My Archer AX20 router was working fine yesterday morning, but since yesterday afternoon it stopped functioning properly:

  • When powered on, only one orange LED stays solid

  • No WiFi SSID is broadcast

  • The issue persists whether or not the Ethernet cable is connected

  • I have already tried rebooting, unplugging/replugging cables, and holding the reset button to restore factory settings, but nothing changes

Has anyone experienced this issue before? Could this indicate a hardware failure, or is there another solution I should try? Any advice would be greatly appreciated.

Thank you!

  0      
 
  0      
 
#1
Options
3 Reply
Re:Archer AX20 router shows only orange LED, no WiFi
a week ago

  @Kernel32Dll I also tried rebooting my modem and unplugging and replugging the modem’s Ethernet cable into the router, but the issue remains the same. The router still powers on with only one solid orange LED and no WiFi SSID.Image

  0  
  0  
#2
Options
Re:Archer AX20 router shows only orange LED, no WiFi
a week ago

  @Kernel32Dll 

 

Try connecting a PC direct to the modem via Ethernet to ensure you have internet through the modem.

 

If you do, power off and unplug the modem and router for 10 min, plug in the modem and wait a bit, then plug in the router and see if the router gets the IP from the modem.

 

Try a different cable between the modem and router.

 

  0  
  0  
#3
Options
Re:Archer AX20 router shows only orange LED, no WiFi
Tuesday - last edited Tuesday

 Hi @Kernel32Dll 

 

Welcome to the community. When attempting to reset the router, how long are you holding the reset button for? I would suggest holding it for 10 - 30 seconds to see if the LED status of the device changes.

 

If the device remains unresponsive, I would highly recommend trying Method 2 in our Router Recovery FAQ HERE.

 

If you would like assistance with any of the steps in the above FAQ, I would recommend opening a support ticket using our Support Portal (Phone, Live Chat, and Email options are available for your convenience). Please include a reference to this community forum thread so our Support Agents can work with you to help address your concerns.

What's New? What is a VPN? What Can a VPN Do For Your Network? Optimize Your Network with the Wi-Fi Toolkit App Join our Official Subreddits: r/tplink, r/tapo, and r/omada_networks
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 107

Replies: 3

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.