Archer vr600 - Error code 1 after rebooting router. I suspect it's an ip collision

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer vr600 - Error code 1 after rebooting router. I suspect it's an ip collision

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer vr600 - Error code 1 after rebooting router. I suspect it's an ip collision
Archer vr600 - Error code 1 after rebooting router. I suspect it's an ip collision
2020-12-27 07:47:46
Model: Archer VR600  
Hardware Version: V2
Firmware Version: 0.2.0 0.9.1 v0074.0 Build 170504 Rel.68210n

I use ip address reservation, and I noticed that if the ip range that can be assigned automatically may overlap ip addresses I reserve I get error 1 when rebooting the router.

So I changed the DHCP pool to be from 192.168.1.1 - 192.168.1.149 and all of my reserved addresses starts from 1.9.168.1.150 and on

 

This worked for a while but sometimes after rebooting the router I still get error 1. I still suspect that the router assigns the same ip twice for 2 different clients resulting in this error. 

When this error comes, I can't do anything in the LAN settings page since nothing loads there, the clients list is empty which makes me believe my suspicious is true

 

 

 

  0      
  0      
#1
Options

Information

Helpful: 0

Views: 669

Replies: 0

Related Articles