AX1800 (AX21) Ethernet connections dropping but wifi clients all work
my new ax1800 drops the ethernet connection I have for a desktop pc and an android tv I have every couple of days for an intermittent period of time and then starts working by itself after several hours before I can figure out the problem. Meanwhile wifi works with no issues for all devices at the same time ethernet stops (including tv after I change to wifi in the settings). I can see my desktop has an ip assigned in the router client list, but isn't reachable when trying to ping thru the router webtool. a restart of the cable modem and ax1800 doesn't seem to resolve the issue. I don't have elaborate settting either, I basically plug&played out of the box. I have about 20 wifi clients that work with no connectivity issues. I haven't tried a hard reset yet, wanted to try to avoid for now while troubleshooting, but seems like my last alternative at this point.
the only advice that online chat support gave me was to update to google dns, and that was the first thing I did out of the box when I was setting up the first time a couple weeks ago.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Same problem here. Does anyone from tp-link monitor this board? Can someone please address this problem with some real solutions!
- Copy Link
- Report Inappropriate Content
@entsurv nobody responds here it seems, they've stopped responding to my messages altogether, so thanks for jumping in. mine has continued to disconnect every few days and only a cable modem and router reboot fixes it. no firmware updates from them in the past month or so. this is my third ax21 router all have the same issue.
- Copy Link
- Report Inappropriate Content
@glf I was on a call with tplink tech support and they apparently had no more idea than you or I what the problem is. A complete reboot/reinstall "solved" the problem temporarily (which is what tech support suggested) but it didn't take long for the problem to reoccur. I'm looking for a different router with better LAN reliability ratings, but its hard to find good information. All wireless, no ethernet.
- Copy Link
- Report Inappropriate Content
I'm having the same problem with the same router. Dropping all Ethernet clients. Various reboots now will not get them to connect at all.
Rather frustrating.
- Copy Link
- Report Inappropriate Content
Are you using the power adapter that came with the router?
Be sure the eithernet cables and the connectors are in good condition. May want to try different ones.
Also if you have USB devices attacted, try without them to see what happens as if they pull to much power that causes strange issues.
- Copy Link
- Report Inappropriate Content
@ArcherC8 Why would evrything work, ethernet and wi-fi, for weeks and then suddenly all ethernet ports stop functioning? This is not a power supply/cabling problem. I have reinitialized the system by resetting the router to factory defaults, and can bring the entire system back to life, FOR A TIME (days-weeks) before the router craps on the ethernet again.
- Copy Link
- Report Inappropriate Content
Are you using the power adapter that came with the router?
yes, have done that with each router so far
Be sure the eithernet cables and the connectors are in good condition. May want to try different ones.
All my cables are farily new and in excellent condition, and all within a few feet of the router.
Also if you have USB devices attacted, try without them to see what happens as if they pull to much power that causes strange issues.
No USB devices have been installed up to now.
- Copy Link
- Report Inappropriate Content
Be sure the router is getting plenty of air as heat can affect the router performance. One poster raised his/her router so it had more clearance under the router and solved their issue.
- Copy Link
- Report Inappropriate Content
@ArcherC8 my router is sitting on a shelf by itself nothing else is near it, plenty of air flow in a large room, and its sitting on the feet that it came with. what did the other poster raise theirs with? if something like that is needed then that's a manufacturers defect.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 8976
Replies: 31
Voters 0
No one has voted for it yet.