Forums/
Powerline Adapters
2024-04-26 11:41:22
@GC1 You can extract the .pib files of your device with the Fritz!Powerline Utility. Use the extracted .pib files to upgrade the firmware to a more recent version with .nvm firmware files....
0HELPFULS
Forums/
Powerline Adapters
2024-04-26 11:25:18
@Jay_L Yes, you are able to restart any connected device to the network with the Fritz!Powerline Utility.
4HELPFULS
Forums/
Powerline Adapters
2022-01-28 10:37:31
743005 Andy_W wrote @PowerlineFW I have a TP-Link TP-8630(P) v1 UK wireless , currently running firmware 2.7, I tried to update to 2.8 with the firmware link on mega.nz - QCA75XX-2.8.0.0030.nvm...
0HELPFULS
Forums/
Powerline Adapters
2021-06-13 12:04:04
@BobTPPLC See post #101. tpPLC Utility: basically reset both adapters to their defaults (network name, passwords etc.). This is critical as both adapters (8010 and 8630) must be on the same default...
0HELPFULS
Forums/
Powerline Adapters
2021-04-03 07:00:16
@crusjeff Try this method: Try updating the adapters with the tpPLC utility instead of an old powerline utility. reset the WPA8630 to factory defaults (and all other 'client' or STA devices) reset...
0HELPFULS
Forums/
Powerline Adapters
2021-02-21 11:14:21
@PowerlineFW @netadair Not sure if you already tried it but reset all adapters, let them join the same unsecure network ("HomePlugAV"; default network management key) and then create a secure network...
0HELPFULS