pscarborLV1Online
Following: 0Followers: 0
Forums/ Access Points
2024-04-25 22:34:23
Re:EAP110-Outdoor firmware update?
@terziyski switced encryption from WPA-PSK (AES) to WPA-PSK (Auto). No idea why this would work, but it did, camera connected at once. I appreciate all your help.
0HELPFULS
Forums/ Access Points
2024-04-25 22:04:25
Re:EAP110-Outdoor firmware update?
@terziyski thanks, did all that. You are correct, it is v3 hardware. The EAP-110 uses WPA-PSK; per the release notes all other formats were removed. The camera is also WPA-PSK as far as I can...
0HELPFULS
Forums/ Access Points
2024-04-25 17:24:58
Re:EAP110-Outdoor firmware update?
@terziyski apologies for the long explanation. I have a wired backhaul network with two EAP-225 WAPs in my house and a EAP-110 outside, used primarily to connect one wireless security camera (all the...
0HELPFULS
Forums/ Access Points
2024-04-24 23:42:22
Re:EAP110-Outdoor firmware update?
@terziyski Thanks, turns out it's in the business section. I downloaded and installed the latest firmware, reconfigured the unit, and of course (!) it no longer works. I'll reach out to business...
0HELPFULS
Forums/ Access Points
2024-04-22 23:30:53
EAP110-Outdoor firmware update?
Thanks in advance for any assistance anyone can offer. I have a hardwired backhaul network with four access points: TP-Link router (currently wifi off); two EAP-225 Outdoor WAPs and one EAP-110...
0HELPFULS
Forums/ Kasa Smart Bulbs
2021-08-31 21:08:15
Re:bulbs no longer connected after power goes out
@Tony, @AliceFayeNC This is a common problem with these bulbs - check Amazon, you will see multiple complaints about network disconnects. Mine will not remain connected if they are turned off via the...
0HELPFULS