Forums/
Deco
2024-04-19 02:09:15
@kaosken , They make power strips that have the receptacles already turned 90 degrees. No engineering from TP-Link needed.
0HELPFULS
Forums/
Deco
2024-04-11 22:34:55
Try this (copied from a Co-Pilot Bing Search) To configure your AT&T BGW210-700 gateway in IP passthrough mode, follow these steps: Access the Gateway Settings: Open a web browser on a computer...
1HELPFULS
Forums/
Deco
2024-04-11 22:16:31
Yes, that is normal. The numbers you see on that screen only show the traffic that is occurring at the moment with the Deco.. It does not show the speed from the ISP.
0HELPFULS
Forums/
Deco
2024-03-23 20:32:33
One thing I have noticed with most of my IOT devices is that the phone itself must be on the IOT network for initial setup of the device. Once setup is completed, the phone can connect to the main...
0HELPFULS
Forums/
Deco
2023-03-23 19:37:26
@David-TP Sorry for the delayed response. Before I saw your suggestion, I tried something on my own and it appears to have solved the problem. I did some rewiring so I now have ATTModem ->cat6 to...
0HELPFULS
Forums/
Deco
2023-03-18 17:28:16
I recently had to move my ISP modem to another room. Because of this move, I changed the unit closest to the modem to the Main unit. They are wired as follows. ISP > Cat6 to Bedroom(New Main Unit) >...
1HELPFULS