TP-LinkOnline
Following: 4Followers: 489
Forums/ Deco
2022-02-22 02:36:23
Re:Deco cannot see wired devices
@John.Jay.Hong Hi, when you set up a static IP address on NVR, have you also configured the DNS server as well as the gateway? Since you have already configured the static IP on the NVR, do you need...
1HELPFULS
Forums/ Deco
2022-02-22 02:29:00
Re:Downgrade firmlink from 1.5.6 Build 20211018 Rel.35617
@Rocy Hi, thank you very much for getting back to me. The firmware 1.5.6 could be downgraded back to 1.5.1 directly. But since I checked with the engineers since they confirmed the new firmware...
0HELPFULS
Forums/ Deco
2022-02-22 02:19:12
Re:Managing two sets with same network names with single account
@azentropy Hi, it is ok to set up two networks under the same email account and it is not suggested to use the same SSID/network name. As for configuration, if the internet connection type is the...
0HELPFULS
Forums/ Deco
2022-02-21 09:24:40
Re:Deco X20 V1.2 Firmware updates?
@aging-youngster Thank you for getting back to me. I am afraid there is no beta firmware available for manual signal source selection yet and I will come back to the forum if such a beta firmware is...
0HELPFULS
Forums/ Deco
2022-02-21 09:10:37
Re:Mesh router connection question
@JLee Hi, since both Linksys and Deco could be worked as wireless routers, in case there is a double NAT issue during USB sharing, it is suggested to set up Deco as access point mode, such as the...
0HELPFULS
Forums/ Deco
2022-02-21 09:02:50
Re:Downgrade firmlink from 1.5.6 Build 20211018 Rel.35617
@Rocy Hi, since the firmware has been released for a while, I haven’t seen such feedback and I don’t think this issue is related to the 1.5.6 firmware. Do you still remember what is your previous...
0HELPFULS
123...