Forums/
Kasa Smart Switches
2019-08-12 18:11:07
@edcclrt Are you using both HS210s or are you only using one and kept a mechanical switch in place? If you are using a single HS210 with a mechanical switch the issue is that your mechanical switch...
0HELPFULS
Forums/
Deco
2019-08-09 22:42:07
@IlluminatedOne When setting up port forward you can setup individual ports or ranges of sequential ports. in this case you will need to setup 3 different rules as you have 2 individual ports and a...
1HELPFULS
Forums/
Deco
2019-08-09 21:14:48
@NASTYBYNATURE Hi Tony, Any time a product is not working properly we take notice. TP-Link is aware of these concerns and we have contacted our engineering team to investigate. However Ring is the...
0HELPFULS
Stories/
Home Network Community
2019-08-09 00:59:01
Wi-Fi 6 is the next generation standard in Wi-Fi technology that builds and improves upon the current 802.11ac Wi-Fi standard. Wi-Fi 6 was created to meet our increasing demand for a network that can...
4HELPFULS
Forums/
Wi-Fi Routers
2019-08-08 18:04:50
Read your last two post. I beleived you had already tried the loopback test and it was successful. If the loop back was not and it is a good cable then yes there is a defect.
0HELPFULS
Forums/
Wi-Fi Routers
2019-08-07 20:43:48
@hondacub That is likely going to be a configuration issue then. Likely the router is configured with the PPPoE handshake. You make have done Auto-detect and the system selected DHCP/Dynamic, it...
0HELPFULS