Forums/
Wi-Fi Routers
2021-12-23 13:23:05
@rchcoffey Since you are not getting the IP from the ISP, most common issue is the modem was not powered down and unplugged during the set-up per the instructions. See under Step 1, Connect The...
12HELPFULS
Forums/
Wi-Fi Routers
2021-12-07 13:18:52
@JoeyNapes After you do a factory reset, you need to re-enter all of your settings including the WIFI settings. Are you able to sign on to the router with a PC connected to the router via Ethernet?
0HELPFULS
Forums/
Wi-Fi Routers
2021-12-02 16:58:42
@joehomeowner There are many reasons for this so you need to work through dofferent things. First I would bypass the router and connect a PC direct to the modem and ensure a good signal from the ISP...
1HELPFULS
Forums/
Wi-Fi Routers
2021-12-02 16:38:01
@MFJacks Maybe... Some will work but others may not. You may want to set one band (2.4) to WPA2 and the other band to WPA3. NOTE: I looked at the specs of the AX3000 and it does not show WPA3 as an...
0HELPFULS
Forums/
Wi-Fi Routers
2021-11-29 18:09:08
@Markmv I prefer to use "Auto" for channels as which channel is best can change from time to time if you have a lot of other WIFIs in the area. I would use specific channels if I was having issues....
0HELPFULS
Forums/
Wi-Fi Routers
2021-11-27 12:31:36
@Markmv I suspect you have SmartConnect turned on. Turn it off and you will be able to set your channels. Note you will need to use different SSIDs for each band and use your device's WIFI settings...
0HELPFULS