Forums/
Wi-Fi Routers
2020-12-04 14:52:52
Hope this may help as I use Xfinity and have an Archer C8, but I found I needed to power cycle the router between changes to the router settings in order to get IPv6 to connect. It took several...
1HELPFULS
Forums/
Wi-Fi Routers
2020-12-04 14:41:56
I assume you can use the WIFI with the phones on both bands, just not sign on to the router. When this happens on a PC, most times clearing the browser history or using a different browser solves the...
0HELPFULS
Forums/
Wi-Fi Routers
2020-12-01 02:25:02
I would replace that Ethernet cable with a quality Cat 5 e or Cat 6 and see it that makes a difference. If your speeds are 100 and below the cable uses only four wires. If it is above, the cable use...
0HELPFULS
Forums/
Wi-Fi Routers
2020-11-30 21:38:13
For channel number it is best to review what channels are being used in your area as if everyone is using the same channel, then there will be a bottleneck. On the 5 GHz network there is a thing...
0HELPFULS
Forums/
Wi-Fi Routers
2020-11-30 15:15:33
Switch the antennas around if your router allows and if that does not fix it, contact support as it sounds like the radio may be bad to me.
0HELPFULS
Forums/
Wi-Fi Routers
2020-11-30 13:53:56
If it were me, I would contact support and see if that have a resolution and in the mean time I would stay on the older version of the firmware.
1HELPFULS